10
EN
spot cooling air conditioning unit PT 5300 SP
Installation
Note
The opening of the hot air duct in the outdoor area
should be positioned so that it is rainproof and
preventing any backflow, or so that it is bent towards
the bottom.
The hot air duct (
11
) can be positioned into the outdoor area,
thus allowing the hot exhaust air to be directed towards the
outside for room air cooling.
The cold air duct (
8
) must be directed at the spot or area to be
cooled (see “Operation” chapter).
Indoor
Body
Outdoor
8
11
Operation
•
Avoid open doors and windows.
Control panel
12
13
14
15
16
17
19
22
24
25
26
28
21 20
23
27
18
No. Designation
Meaning
12
Segment display Indication of target temperature
Indication of the number of hours during
timer programming
Display of error codes tc and CO
13
Increase value
button
Increasing the target temperature for
cooling
For increasing the number of hours
when programming the timer
14
Decrease value
button
Reducing the target temperature for
cooling
For reducing the number of hours when
programming the timer
15
Condensation
tank full
LED
Illuminated when the condensation tank
is full.
16
Fault
LED
Is illuminated if an error message is
displayed (see also chapter “Errors and
faults”)
17
Compressor
LED Is illuminated when the compressor is in
operation
19
Timer
button
Switching the timer function on or off
18
Timer
LED
Is illuminated when the timer is
activated.
