TrojanLabel T3-OPX, Руководство пользователя

Страница: 46 / 78

T3-OPX installation Page | 45
4.4 Shutdown
CAUTION:
Always wait until shutdown process finishes before
shutting down the power supply! Otherwise the
Maintenance Module inside the machine might end
up in the wrong position and cannot protect the
printhead from dehydration. Dehydration of nozzles
in the printhead may result in print quality defects.
Shutdown process may take 1-2 minutes.
•
Shuts down the T3-OPX completely.
NOTE: When shutting down the unit it is advised
to wait with turning the power switch off until the
shutdown process is finished. There is a message
on the display when the shutdown process is
initiated to indicate that the shutdown process is
still going on.
NOTE: When shutdown process is finished (the
screen turns blank) it is advised to turn the
physical power switch off. The power switch is
located at the back of the TrojanTwo press.