Trojan POWER 500, Руководство пользователя

Страница: 10 / 32

10
10390
ASSEMBLY STEPS
1. PREPARATION
• Before assembling make sure that you will have enough space around the item.
• Use the supplied parts and hardware for the assembly.
• Before assembling please check whether all the required parts have been supplied as per the exploded
drawing on the previous page.
STEP 1
STEP 1: FOOT PAD INSTALLATION
Position 2 x Foot Pads (28) onto the
Front Stabiliser (6).
Position 2 x Foot Pads (28) onto the
Rear Stabiliser (7).
STEP 2: FRONT AND REAR STABILISERS
INSTALLATION
Remove 2 x M8 x 15 Bolts (12) and 2 x Ø8 x Ø20 Big
Flat Washers (21) from Front Stabiliser (6). Remove
2 x M8 x 15 Bolts (12) and 2 x Ø8 x Ø20 Big Flat
Washers (21) from Rear Stabiliser (7).
Position the Front Stabiliser (6) in front of the Main
Frame (1) and align bolt holes.
Attach the Front Stabiliser (6) onto the front curve
of the Main Frame (1) with the 2 x M8 x 15
Bolts (12) and 2 x Ø8 x Ø20 Big Flat Washers (21)
that were removed.
Position the Rear Stabiliser (7) behind the
Main Frame (1) and align bolt holes.
Attach the Rear Stabiliser (7) onto the rear curve of
the Main Frame (1) with 2 x M8 x 15 Bolts (12) and
2 x Ø8 x Ø20 Big Flat Washers (21) that
were removed.
STEP 2