Trojan DUAL 510, Инструкция и руководство по сборке

Страница: 8 / 26

1064M-8
STEP 02
Step 2: Handle Bar assembly
1. Attach two Wave Washers (101) onto the Left and Right sides of the Handle Bar axle.
2. Slide the Lower Left and Right Handle Bars (4&5) onto the appropriate side of the axle. There is a small sticker on
each lower handlebar that shows “L” (Left) or “R” (Right).
3. Attach two 5/16” x 23 x 1.5T Flat Washers (97) onto two 5/16” x 15mm Hex Head Screws (70), and install in the
threaded holes in the ends of the axle.
4. Attach two Handle Bars (13, left) and (14, right), onto the Lower Left and Right Handle Bars (4&5) and fasten with
six 5/16”x 15mm Button Head Socket Screws (75), using the Combination M5 Allen Wrench & Phillips Head Screw
Driver (108).