Trojan DUAL 510, Инструкция и руководство по сборке

Страница: 10 / 26

1064M-10
STEP 04
STEP 4: Cosmetic Covers assembly
1. Install the Connecting Arm Covers (59 & 60) over the connection of the Rod End and Lower Handle Bars (4 & 5)
with four M5 x 15mm Phillips Head Screws (79) and two 3.5x12mm Self Tapping Screws (84), using the
Combination M5 Allen Wrench & Phillips Head Screw Driver (108).
2. Install both the Wheel Covers (52) on the Pedal Arms (2& 3) above the Wheels with the four M5x15mm Phillips
Head Screws (79).
3. Install the Front Handle Bar Covers (54 & 56) and Rear Handle Bar Covers (55 & 57) over the Handle Bar axle
connections with the six 3.5x12mm Self Tapping Screws (84).
4. Install the two Middle Stabiliser Covers (61) on the joint of the Rail Stabilisers (16) and the Rail Assembly (15).
Secure the covers with two M5 x 15mm Phillips Head Screws (79).
5. Install the Rear Stabiliser Covers (62 & 63) on the rear end of the Rail Stabilisers (16) and secure them with two
M5 x 15mm Phillips Head Screws (79).