Triumph Tiger XCX, Руководство пользователя

Страница: 75 / 172

General Information
75
Handlebar Adjustment
The handlebars are adjustable for reach
by approximately 0.8 in (20 mm).
Note:
• This procedure assumes the
handlebars are in the standard
position, as delivered from the
factory. If the handlebars have
already been adjusted as described
below, the fixing positions will be
reversed.
To adjust the handlebars, loosen and
remove the handlebar rear (0.31 in
(8 mm) threaded) clamp fasteners, and
then the front (0.39 in (10 mm) threaded)
clamp and riser fasteners.
1. 0.39 in (10 mm) fasteners
2. 0.31 in (8 mm) fasteners
Lift the handlebars out of the handlebar
risers and support with the aid of an
assistant.
Rotate both risers through 180° and
align the fixing holes.
Reposition the handlebars to the risers.
Reinstall the upper clamps, and secure
with the two 0.39 in (10 mm) threaded
fasteners in the rear fastener positions.
Do not fully tighten the fasteners at this
stage.
Warning
It is recommended to have handlebar
adjustments carried out by a trained
technician of an authorized Triumph
dealer. Handlebar adjustments carried
out by a technician who is not of an
authorized Triumph dealer may affect
the handling, stability or other aspects
of the motorcycle's operation which
may result in loss of motorcycle
control and an accident.
Warning
Before starting work, ensure the
motorcycle is stabilized and
adequately supported. This will help
prevent injury to the operator or
damage to the motorcycle.
2
cgil
1