Triumph Tiger XCX, Руководство пользователя

Страница: 125 / 172

Maintenance and Adjustment
125
Loosen the wheel spindle nut.
Loosen the lock nuts on both the left
hand and right hand chain adjuster
bolts.
Moving both adjusters by an equal
amount, turn the adjuster bolts
clockwise to increase chain free
movement and counterclockwise to
reduce chain free movement.
When the correct amount of chain free
movement has been set, push the wheel
into firm contact with the adjusters.
Tighten both adjuster lock nuts to
1 lbf ft (20 Nm) and the rear wheel
spindle nut to 81 lbf ft (110 Nm) .
Repeat the chain adjustment check.
Readjust if necessary.
Check the rear brake effectiveness.
Rectify if necessary.
Chain and Sprocket Wear Inspection
1. Measure across 20 links
2. Weight
Remove the chain guard.
Stretch the chain taut by hanging a
20 - 40 lb (10 - 20 kg) weight on the
chain.
Measure the length of 20 links on the
straight part of the chain from pin
center of the 1
st
pin to the pin center of
the 21
st
pin. Since the chain may wear
unevenly, take measurements in several
places.
If the length exceeds the maximum
service limit of 12.56 in (319 mm), the
chain must be replaced.
Rotate the rear wheel and inspect the
drive chain for damaged rollers, and
loose pins and links.
Warning
Operation of the motorcycle with
insecure adjuster lock nuts or a loose
wheel spindle may result in impaired
stability and handling of the
motorcycle. This impaired stability and
handling may lead to loss of control or
an accident.
Warning
It is dangerous to operate the
motorcycle with defective brakes; you
must have your authorized Triumph
dealer take remedial action before you
attempt to ride the motorcycle again.
Failure to take remedial action may
reduce braking efficiency leading to
loss of motorcycle control or an
accident.
cgjt
2
1