Triumph T509 Speed Triple, Руководство пользователя

Страница: 55 / 81

Maintenance and Adjustment
Wheel Bearings inspection
If the wheel bearings in the front or rear
wheel allow play in the wheel hub, are noisy,
or if the wheel does not turn smoothly, have
your authorised Triumph dealer inspect the
wheel bearings.
The wheel bearings must be inspected at
the intervals specified in the scheduled
maintenance chart.
l
Gently rock the top of the front wheel
from side to side.
l
If any free-play can be detected, ask
your authorised Triumph dealer to
inspect and rectify any faults before
riding.
l
Reposition the lifting device and
repeat for the rear wheel.
A
WARNING: Operation with
worn or damaged wheel
bearings may cause impaired
handling and instability leading to an
accident. If in doubt, have the
motorcycle inspected by an
authorised Triumph dealer before
riding.
.
Remove the support and place the
motorcycle on the side stand.
l
Refit the belly panel (where fitted).
FRONT SUSPENSION
All models are fitted with forks which are
adjustable for spring pre load, compression
damping and rebound damping.
Front Fork Inspection
l
Examine each fork stanchion for any
sign of damage, scratching of the
slider surface, or for oil leaks.
l
If any damage or leakage is found
consult an authorised Triumph
dealer.
To check that the forks operate smoothly:
l
Position the motorcycle on level
ground.
l
While holding the handlebars and
applying the front brake, pump the
forks up and down several times.
NOTE:
l
The suspension movement will be
affected by adjustment settings.
l
If roughness or excessive
stiffness is detected, consult your
authorised Triumph dealer.
Page 54