Triumph T509 Speed Triple, Руководство пользователя

Страница: 18 / 81

General Information
COOLANT TEMPERATURE GAUGE
The coolant temperature gauge indicates
the temperature of the engine coolant. On
the right -hand side of the gauge face is the
‘red zone. If the temperature gauge needle
moves into the ‘red zone’ this indicates that
the engine is overheating.
needle enters the ‘red zone’ as severe
WARNING LIGHTS
INDICATORS When the indicator
switch is turned to left or right, the
corresponding direction indicator light
flashes on and off.
c l
LOW OIL PRESSURE: The low oil
pressure warning light becomes
illuminated whenever the oil pressure is
dangerously low (or the ignition switch is in
the ‘ON’ position with the engine not
running). When the engine is running, the
light will remain off when sufficient oil
pressure is present.
When starting the motorcycle, check that
the light comes on when the ignition is in the
‘ON’ position, but goes out as soon as the
engine starts
CAUTION: Stop the engine
immediately if the low oil
pressure warning light comes on
during normal operation. Do not
restart the engine until the fault has
been rectified.
Severe engine damage will result
from running the engine when the oil
warning light is illuminated.
HIGH BEAM: When the headlights
are switched on and the headlight
dip switch is set to ‘high beam’, the high
beam warning light will illuminate.
NEUTRAL: The neutral warning
light
indicates when the
transmission is in neutral (no gear selected).
The warning light will illuminate when the
transmission is in neutral with ignition switch
in the ‘ON’ position.
LOW FUEL: The low fuel indicator
will illuminate when there are
approximately 3.7 litres of fuel remaining in
the tank.
ENGINE MANAGEMENT
SYSTEM MALFUNCTION
INDICATOR LIGHT:
The
malfunction indicator light for the engine
management system illuminates when the
ignition is switched on, remains illuminated
during starting, and goes out shortly after the
engine starts.
If the malfunction indicator light becomes
illuminated during riding, a fault has
occurred in the engine management
system. In this case the system will switch
to ‘limp-home’ mode so that riding may
continue. Contact an authorised Triumph
dealer as soon as possible to have the fault
checked out and rectified.
A
WARNING: Do not continue
to ride for a long period with
the malfunction indicator light
illuminated.
The fault which has
occurred
may
affect
engine
performance and fuel consumption.
Reduced engine performance could
cause a dangerous riding condition,
leading to loss of control and an
accident
Page 17