background image

Accessories, Loading and Passengers

A

WARNING:

Single seat

models must never carry a

passenger unless a passenger seat is

fitted. Carrying a passenger without

first fitting a passenger seat will

contravene the law and may also
cause loss of motorcycle control

leading to an accident.

A

WARNING: Your passenger

should be thoroughly familiar

with motorcycle operation.

The passenger can cause loss of

control of the motorcycle by incorrect

positioning during cornering and
sudden movements.

It is important that the passenger sits
still while the motorcycle is in motion
and does not interfere with the
operation of the motorcycle.

If a passenger is carried, the rider

should instruct the passenger to keep

his or her feet on the passenger

footrests and to firmly hold onto the

seat strap or the rider’s waist or hips.

The passenger should also be
advised to lean with the rider when
travelling in corners and not to lean

unless the rider does so.

Do not carry animals on your

motorcycle.

A

WARNING: Do not carry a

passenger unless he or she is

tall enough to reach the footrests

provided.

A passenger who is not tall enough to
reach the footrests will be unable to
sit securely on the motorcycle and

may cause instability leading to loss

of control and an accident.

A

WARNING: Never attempt to

store any items between the

frame and the fairing. This can

restrict the steering and will cause

loss of control leading to an accident,

Weight attached to the handlebar 

front fork will increase the mass of the

steering assembly and can result in
loss of steering control leading to an

accident.

Page 35

Содержание T509 Speed Triple


















































































Отзывы: