Triumph T509 Speed Triple, Руководство пользователя

Страница: 48 / 81

Maintenance and Adjustment
l
Set the adjuster at the throttle body
end of the cable to give 2-3 mm of
play at the twist grip. Tighten the
locknut.
l
Make any minor adjustments as
necessary to give 2-3 mm of play
using the adjuster at the twist grip end
of the cable. Tighten the locknut.
A
WARNING: Ensure that both
the adjuster locknuts are
tightened.
A loose throttle cable
adjuster could cause the throttle to
stick leading to loss of control and an
accident.
l
Reconnect the battery, positive (red)
lead first.
l
Refit the seat.
CLUTCH
The motorcycle is equipped with a cable
operated clutch.
If the clutch lever has excessive free-play,
the clutch may not disengage fully and
cause difficulty in changing gear and clutch
drag. Conversely, if the clutch lever has
insufficient free-play the clutch may not
engage fully, causing clutch slip.
Clutch lever free-play must be checked in
accordance with scheduled maintenance
requirements.
Inspection
l
Check that there is 0.4-0.8 mm
clutch lever free-play as shown in the
diagram above.
l
If there is an incorrect amount 01
free-play, adjustments must be
made.
1. Lever
2. 0.4-0.8
mm
Adjustment
Loosen the knurled locknut at the
lever end of the clutch cable and turn
the adjuster sleeve until the correct
amount of clutch lever free-play is
achieved.
Tighten the knurled locknut against
the clutch lever assembly.
If correct adjustment cannot be made
using the lever adjuster, use the cable
adjuster at the lower end of the cable.
Loosen the adjuster locknut.
Turn the outer cable adjuster to give
0.4-0.8 mm of free-play at the clutch
lever.
Tighten the locknut.
Page 47