Triumph Daytona Moto2 765 2020 Скачать руководство пользователя

Страница: 71 / 163

General Information

Side Stand

Warning

The motorcycle is fitted with an
interlock system to prevent it from
being ridden with the side stand in the
down position.

Never  attempt  to  ride  with  the  side
stand  down  or  interfere  with  the
interlock mechanism as this will cause
a  dangerous  riding  condition  leading
to  loss  of  motorcycle  control  and  an
accident.

Warning

Do not lean, sit or climb on the
motorcycle when it is supported on
the side stand.

This may cause the motorcycle to fall
over leading to motorcycle damage
and an accident.

Side stand

The motorcycle is equipped with a side
stand on which the motorcycle can be
parked.

When using the side stand, always turn
the handlebars fully to the left and
leave the motorcycle in first gear.

Whenever the side stand is used, before
riding, always make sure that the side
stand is fully up after first sitting on the
motorcycle.

For instructions on safe parking, refer
to the How to Ride the Motorcycle
section.

Содержание Daytona Moto2 765 2020




































































































































































Результаты поиска

Содержание Daytona Moto2 765 2020

Отзывы:

Похожие инструкции для Daytona Moto2 765 2020

Бренды по названию

Популярные бренды

Triumph Daytona Moto2 765 2020, Руководство пользователя

Результаты поиска

Содержание Daytona Moto2 765 2020

Отзывы:

Похожие инструкции для Daytona Moto2 765 2020

Бренды по названию

Популярные бренды