Triumph Daytona Moto2 765 2020, Руководство пользователя

Страница: 127 / 163

Maintenance
127
24 hours after fitting, the tyre
pressures
must be checked and
adjusted, and the tyres and inner tubes
examined
for correct seating.
Rectification must be carried out as
necessary. The same checks and
adjustments must also be carried out
when 100
miles (160 km) have been
travelled after fitting.
Warning
Inner tubes must only be used on
motorcycles fitted with spoked wheels
and with tyres marked 'TUBE TYPE'.
Some brands of approved tyres
marked 'TUBELESS' may be suitable
for use with an inner tube. Where this
is the case, the tyre wall will be
marked with text permitting the
fitment of an inner tube.
Use of an inner tube with a tyre
marked 'TUBELESS', and NOT marked
as suitable for use with an inner tube,
or use of an inner tube on an alloy
wheel
marked 'SUITABLE FOR
TUBELESS TYRES' will cause deflation
of the tyre resulting in loss of
motorcycle control and an accident.
Warning
Do not install tube type tyres on
tubeless rims.
The bead will not seat and the tyres
could slip on the rims, causing rapid
tyre deflation that may result in a loss
of motorcycle control and an accident.
Never install an inner tube inside a
tubeless tyre without the appropriate
marking. This will cause friction inside
the tyre and the resulting heat build-
up may cause the tube to burst
resulting in rapid tyre deflation, loss of
motorcycle control and an accident.
Warning
If a tyre or inner tube sustains a
puncture, the tyre and inner tube
must be replaced.
Failure to replace a punctured tyre
and inner tube, or operation with a
repaired tyre or inner tube can lead to
instability, loss of motorcycle control
or an accident.
Warning
If tyre damage is suspected, such as
after striking the kerb, ask your
authorised Triumph dealer to inspect
the tyre both internally and externally.
Tyre damage may not always be visible
from the outside.
Operation of the motorcycle with
damaged tyres could lead to loss of
control and an accident.