Triumph Daytona Moto2 765 2020, Руководство пользователя

Страница: 23 / 163

General Information
23
Hand Controls
Left Handlebar Switches
5
2
3
4
1
1. High beam button
2. Mode button
3. Direction indicator switch
4. Joystick
5. Horn button
High Beam Button
When the high beam button is pressed
the high beam will be switched on. Each
press of the button will swap between
dip and high beam.
Note
A lighting on/off switch is not fitted to
this model. The position light, rear light
and licence plate light all function
automatically when the ignition is
turned to the ON position.
A Pass feature is not available on this
model.
The headlight will function when the
ignition switch is turned to the ON
position. The headlight will go off while
pressing the starter button until the
engine starts.
Mode Button
When the Mode button is pressed and
released it will activate the Riding Mode
Selection menu in the display screen.
Further presses of the Mode button will
scroll through the available riding modes
(see page
42).
Direction Indicator Switch
When the direction indicator switch is
pushed to the left or right, the
corresponding direction indicators will
flash on and off.
The indicators can be cancelled
manually. To manually turn off the
indicators, press and release the
indicator switch in the central position.
Automatic self cancelling indicators can
be activated in the Bike Set Up menu,
for more information see page
51.
There are two options available:
• Manual - The self-cancelling
function is off. The direction
indicators
must be manually
cancelled.
• Auto - The self-cancelling function
is on. The indicators will activate for
eight seconds plus an additional 65
meters.
Note
If the motorcycle stops for any reason
the indicators will flash for the
remainder of the time and distance
unless manually cancelled by the rider.
Joystick Button
The Joystick is used to operate the
following functions of the instruments:
• Up - scroll the menu from the
bottom of the list to the top