Triumph Daytona Moto2 765 2020 Скачать руководство пользователя страница 119

Страница: 119 / 163

Maintenance

119

Front Fork Inspection

Warning

Riding the motorcycle with defective
or damaged suspension is dangerous
and may lead to loss of control and an
accident.

Warning

Never attempt to dismantle any part
of the suspension units

All

suspension

units

contain

pressurised oil.

Skin and eye damage can result from
contact with the pressurised oil.

Inspecting the Front Forks

To inspect the front forks:

•

Position the motorcycle on level
ground.

•

While holding the handlebars and
applying the front brake, pump the
forks up and down several times.

•

If roughness or excessive stiffness
is detected, consult your authorised
Triumph dealer.

•

Examine each fork for any sign of
damage, scratching of the slider
surface, or for oil leaks.

•

If any damage or leakage is found,
consult an authorised Triumph
dealer.

Содержание Daytona Moto2 765 2020




































































































































































Результаты поиска

Содержание Daytona Moto2 765 2020

Отзывы:

Бренды по названию

Популярные бренды

Triumph Daytona Moto2 765 2020, Руководство пользователя

Результаты поиска

Содержание Daytona Moto2 765 2020

Отзывы:

Бренды по названию

Популярные бренды