Triumph Daytona Moto2 765 2020, Руководство пользователя

Страница: 150 / 163

Cleaning and Storage
150
Preparation after Storage
To prepare the motorcycle to be ridden
after storage, do the following:
• Install the battery (if removed) (see
page
131).
• If the motorcycle has been stored
for more than four months, change
the engine oil (see page
100).
• Check all the points listed in the
Daily Safety Checks section.
• Before starting the engine, remove
the spark plugs from each cylinder.
• Put the side stand down.
• Crank the engine on the starter
motor several times.
• Refit the spark plugs, tightening to
12 Nm, and start the engine.
• Check and if necessary correct the
tyre pressures (see the relevant
Specification section).
• Clean the entire vehicle thoroughly.
• Check the brakes for correct
operation.
• Test ride the motorcycle at low
speeds.