General information
42
during riding, causing the air in the tire
to expand and the inflation pressure to
increase. The cold inflation pressures
specified by Triumph take account of
this.
Owners must only adjust tire pressures
when the tires are cold using an
accurate tire pressure gauge (see
page
107), and must not use the tire
pressure display on the instruments.
Warning
The tire pressure monitoring system is
not to be used as a tire pressure
gauge
when
adjusting
the
tire
pressures. For correct tire pressures,
always check the tire pressures when
the tires are cold and using an
accurate tire pressure gauge (see
page
128).
Use of the TPMS system to set
inflation pressures may lead to
incorrect tire pressures leading to loss
of motorcycle control and an accident.
Replacement Tires
When replacing tires, always have an
authorized Triumph dealer mount your
tires and make sure they are aware that
tire pressure sensors are installed to
the wheels.
Ignition Switch/Steering Lock
P
U
S
H
P
OF
F
ON
3
4
5
1
2
1.
Ignition switch/Steering lock
2.
ON position
3.
OFF position
4.
LOCK position
5.
PARK position
Switch Location
The ignition switch is located in the
center of the headlight support bracket.
Switch Operation
This is a four position, key operated
switch. The key can be removed from
the switch only when it is in the OFF,
LOCK or P (PARK) position.
TO LOCK: Turn the steering fully to the
left, turn the key to the OFF position,
push and fully release the key, then
rotate it to the LOCK position.
PARKING: Turn the key from the LOCK
position to the P position. The steering
will remain locked.
Note:
•
Do not leave the steering lock in
the P position for long periods of
time as this will cause the battery
to discharge.
