General information
40
Tire Pressure Monitoring
System (TPMS) (if equipped)
Note:
•
Tire Pressure Monitoring System
(TPMS) is an accessory option only
available on models equipped with
cast alloy wheels.
Warning
The daily check of tire pressures must
not be excluded because of the fitment
of the TPMS. Check the tire pressure
when the tires are cold and using an
accurate tire pressure gauge (see
page
Use of the TPMS system to set
inflation pressures may lead to
incorrect tire pressures leading to loss
of motorcycle control and an accident.
Function
Tire pressure sensors are installed to
the front and rear wheels. These
sensors measure the air pressure inside
the tire and transmit pressure data to
the instruments. These sensors will not
transmit the data until the motorcycle is
traveling at a speed greater than 12
mph (20 km). Two dashes will be visible
in the display screen until the tire
pressure signal is received.
The tire pressure monitoring system
(TPMS) is an accessory equipped item
and must be installed by your
authorized Triumph dealer.
The TPMS display screen on the
instruments will only be activated when
the system has been installed.
An adhesive label will be installed to the
wheel rim to indicate the position of the
tire pressure sensor which is near the
valve.
Tire Pressure Sensor Serial Number
The serial number for the tire pressure
sensor is printed on a label attached to
the sensor. This number may be
required by the dealer for service or
diagnostics.
When the tire pressure monitoring
system is being installed to the
motorcycle, make sure that the dealer
records the serial numbers of the front
and rear tire pressure sensors in the
spaces provided below.
Front Tire Pressure Sensor
Rear Tire Pressure Sensor
