General information
56
Place the seat cover facing upwards, on
a clean, flat surface using the metal
stand and two plastic stands at the rear
of the seat to rest on.
See page
122 for seat cleaning
information.
Seat Lock
cith
1
1.
Seat lock
The seat can be removed to gain access
to the battery, fuse box and Owner's
Handbook. The seat lock is located on
the left hand side of the motorcycle, on
the frame below the seat.
To remove the seat, insert the ignition
key into the seat lock and turn it
anticlockwise. This will release the seat
from its lock and allow it to be slid
rearwards for complete removal from
the motorcycle.
To re-install the seat, engage the seat's
tongue underneath the bracket near
the fuel tank. Line up the hinges and
press down at the rear to engage the
seat lock. An audible click can be heard
when the seat is fully engaged into its
lock.
Warning
To prevent detachment of the seat
during riding, after fitting always grasp
the seat and pull firmly upwards. If the
seat is not correctly secured in the
lock, it will detach from the lock. A
loose or detached seat could cause
loss of motorcycle control and an
accident.
