TRIUMPH BOARD 2000, Руководство пользователя

Страница: 48 / 57

47 47
Projector Problems
The projector stops responding to all controls
`
If possible, turn off the projector, then unplug the power cord
and wait at least 20 seconds before reconnecting power.
Lamp burns out or makes a popping sound
`
When the lamp reaches its end of life, it will burn out
and may make a loud popping sound. If this happens,
the projector will not turn on until the lamp module has
been replaced. To replace the lamp, follow the proce-
dures in the “Replacing the Lamp” section on pages 43.
Remote Control Problems
If the remote control does not work
`
Check the operating angle of the remote control is
within ±30° both horizontally and vertically of one of the
IR receivers on the projector.
`
Make sure there are not any obstructions between the
remote control and the projector. Move to within 7 m
(±0°) of the projector.
`
Make sure the batteries are inserted correctly.
`
Replace batteries if they are exhausted.
Sound Problems
If no sound from the projector
`
If you are playing an external source, make sure you
have an audio cable securely connected between the
source device and the projector’s audio input.
`
Please make sure the external speakers are not connected.
`
Make sure the volume is not set to minimum.
`
Make sure the “Volume --> Mute” function is set to “Off”.
3D Problems
Blurry double image
`
Select “3D” --> “3D” from OSD and choose “Off” to
avoid normal 2D image is blurry double image.
Troubleshooting