TRIUMPH BOARD 2000, Руководство пользователя

Страница: 42 / 57

41
Settings
41
Projector Status and Control Page
`
Projector Status: There are 4 status: Standby, Warning up, Lamp
On, Power Saving and Cooling. Click the Refresh button to
refresh the status and control settings.
`
Auto Power Off: Auto Power Off can be set to Off(0) or 1~120
minutes. See “Auto Power Off (min)” function.
`
Alert Status: There are three error status: Lamp warning, Low
lamp life, and Temperature warning. Your projector might lock
up in protection mode if any of the alerts is activated. To exit
protection mode, click the Clear to clear the Alert Status before
you could Power ON your projector.
`
Ceiling Mount: Allows you to select the projector mode, depending
on how the projector is mounted. There are four projection modes:
Front, Front Ceiling, Rear and Rear Ceiling.See “Ceiling Mount”
function.
`
Source Select: The Source Select menu allows you to select your
projector's input source. You can select VGA 1/VGA 2, S-Video,
Composite Video and HDMI.
`
Color Mode: Select a mode to optimize the display image based
on how the projector is being used. See “Color Mode” function.
`
Blank Screen: Select On/Off to hide/unhide the screen picture.
`
Aspect Ratio: Allows you to select the aspect ratio to adjust how
the image appears.
`
Brightness: Select value to adjust the brightness of the image.
`
Contrast: Select value to adjust the display contrast.
`
Volume: Select the value (0~32) for the audio volume
`
Mute: Choose “On” to turn mute on. Choose “Off” to turn mute off.
`
Microphone Volume: Select the value (0~32) for the Microphone
Volume.

Click the Auto Adjust
button to adjust the
settings automati-
cally.

Click the Factory Re-
set button to restore
the factory default
settings.