TRIUMPH BOARD 2000, Руководство пользователя

Страница: 45 / 57

44 44
Troubleshooting
If you experience a problem with your projector, please refer
to the following information. If a problem persists, please con-
tact your local reseller or service center.
Image Problems
No image appears on-screen
`
Ensure all the cables and power connections are correctly
and securely connected as described in the “Installation”
section.
`
Ensure the pins of connectors are not crooked or broken.
`
Check if the projection lamp has been securely installed.
`
Ensure that the “Blank” feature is not turned on.
Partial, scrolling or incorrectly displayed image
`
Press “Auto Sync” on the remote control.
y
If you are using a PC:
- For Windows
1. Open the “My Computer” icon, the “Control Panel”
folder, and then double click on the “Display” icon.
2. Select the “Settings” tab.
3. Verify that your display resolution setting is lower
than or equal to 1080p.
4. Click on the “Confirm”.
- For Windows Vista:
1. From the “My Computer” icon, open the “Control
Panel” folder, and double click the “Appearance
and Personalization”
2. Select “Personalization”.
3. Click “Adjust screen resolution” to display “Display
Settings”. Click on the “Confirm”.
Troubleshooting