Triumph Adler P-3521DN, Руководство по продвинутой эксплуатации

Страница: 59 / 130

Using the Operation Panel 2-39
Wide A4 (Wide A4 pitch)
Turn this to
On
to increase the maximum number of characters that can
be printed in a line for an A4 page (78 characters at 10 pitch) and Letter
size page (80 characters at 10 pitch). This setting is only effective in PCL
6 emulation.
1
Press
Z
while
>Page Set >
is displayed.
2
Press U or V repeatedly until
>>Wide A4
appears.
3
Press [OK] . A blinking question mark (
?
) appears.
4
Select
On
or
Off
using U or V .
5
Press [OK] .
6
Press [MENU] . The display returns to
Ready
.
XPS FitTo Page (Print area setting for XPS data)
Select
On
in this setting to enlarge or reduce XPS files to fit the printable
area during printing.
1
Press Z while
>Page Set >
is displayed.
2
Press U or V repeatedly until
>>XPS FitTo Page
appears.
3
Press [OK] . A blinking question mark (
?
) appears.
4
Select
On
or
Off
using U or V .
5
Press [OK] .
6
Press [MENU] . The display returns to
Ready
.
TIFF/JPEG Size (Print mode setting for TIFF/JPEG files)
Use this setting to select the printing method used when TIFF or JPEG
files are printed directly. The default setting is
Paper Size
.
1
Press Z while
>Page Set >
is displayed.
2
Press U or V repeatedly until
>>TIFF/JPEG Size
appears.
3
Press [OK] . A blinking question mark (
?
) appears.
4
Press U or V repeatedly until the desired print mode is displayed.
The list shows the following print modes:
Paper Size
(scaled to fit the paper size)
Images are resized so that they fill the paper size when printed.
Image Resolution
(matched to the image resolution)
Image files are printed at the resolution specified in the resolution
information. Images with no resolution information are printed using
the Paper Size setting.
Print Resolution
(matched to the print resolution)
>>Wide A4
? Off
>>XPS FitTo Page
? Off
>>TIFF/JPEG Size
? Paper Size