manualshive.com logo in svg

Triumph Adler P-3521DN, Руководство по продвинутой эксплуатации, Страница: 104 / 130

Поделиться
Скачать
Triumph Adler P-3521DN Скачать руководство пользователя страница 104

2-84

Using the Operation Panel

Adjust/Maintenance (Adjust/Maintenance 
selection/setting)

Adjust/Maintenance is used to adjust the print quality and to carry out 
printer maintenance. 

The options available in Adjust/Maintenance are as follows:

• Restart Printer
• Service (for maintenance)

IMPORTANT  

Service

 is primarily a menu used by service person-

nel for maintenance work. There is no need for customers to use this 
menu.

1

Press 

[MENU]

.

2

Press 

U

 or 

V

 repeatedly until 

Adjust/Maintenance >

 appears.

Restart Printer

The procedure described below resets the printer’s temporary 
conditions, such as the current page orientation, font, etc., set by 
commands to their default values. Downloaded fonts and macros are 
deleted from the printer’s memory.

1

Press 

Z

 while 

Adjust/Maintenance >

 is displayed.

2

Press 

U

 or 

V

 repeatedly until 

>Restart Printer

 appears.

3

Press

 [OK]

. A question mark (

?

) appears. 

4

Press

 [OK]

 again. 

Self test

 appears while the printer is resetting 

itself, followed by 

Please wait

 and then 

Ready

.

Adjust/Maintenance

>

>Restart Printer ?

Содержание P-3521DN



































































































































Отзывы:

Нет отзывов