Triumph Adler DC 2062, Инструкция по эксплуатации

Страница: 72 / 165

Section 6 ADVANCED COPY MODES
6-6
2A080030A
KM-6230 (KME)
/ 131
* If you want to change the magnification ratio, touch the “+” key or the “-” key at the right of
the copy magnification ratio display to select the desired ratio. If you want to change the
zoom mode, such as selecting the standard zoom or XY zoom mode, touch the “ZOOM”
key and follow the instructions from page 4-4.
* The settings for the zoom mode can be changed for each job.
* If you want to change the setting for the border erase mode, touch the “+” key or the “-” key
at the right of the border width display to select the desired width. The border width can be
set to 6 mm, 12 mm or 18 mm.
* In this setting, only sheet originals can be selected for use in the border erase mode.
* The settings for the border erase mode can be changed for each job.
* If you touch the “FUNCTION” key, the following copy functions can be selected.
• Margin mode: Touch the “MARGIN” key and follow the procedure from step 4 on page 5-2.
• Combined copy mode: Touch the “MERGE COPY” key and follow the procedure from step
3 on page 5-20.
• Print page numbers function: Touch the “PAGE #” key and follow the procedure from step 4
on page 5-4.
7. Set the originals.
8. Press the Start key.
9. If you want to scan in more originals, touch the “CONTINUE” key and repeat the procedure
from step 6.
* Once all of the originals have been completely scanned, go to step 10.
* To delete the last set of the originals that you scanned, touch the “CLEAR LAST JOB”
key.
* If you want to make a test copy, touch the “TEST PRINT” key.
Once the test copy has been made, the touch panel will return to the screen for step 9.
10. Touch the “TO PRINT” key.
11. Select how you want the copies to be finished.
* If you want to change the Sorting mode, touch the “SORT” key to highlight the desired
mode (Sort or Group).
* If the copier is equipped with the optional Finisher, it is also possible to change the
Staple-Sort mode and the Hole Punch mode settings.
* If the copier is equipped with the optional Booklet Stitcher, it is the Staple-Sort mode
settings that can also be changed.
12. Set the number of copies that you want to make by touching the “+” key or the “-” key. This
number can also be entered directly with the numeric keys.
13. Touch the “END” key. Copying will begin.
6-5