manualshive.com logo in svg

Triumph Adler DC 2062, Инструкция по эксплуатации

Поделиться
Скачать
Triumph Adler DC 2062 Скачать руководство пользователя страница 147

Section 10  TROUBLESHOOTING

2A080030A

KM-6230 (KME)

/ 131

●

 Misfeed inside the right upper cover

If “PAPER MISFEED. OPEN RIGHT UPPER COVER.” and the misfeed location indica-
tor shown in the illustration appear on the touch panel, a misfeed has occurred inside the
right upper cover.
* If the copier is equipped with the optional Side Deck, first pull the Side Deck away from

the copier before you perform the following procedure.

1. Open the right upper cover.

2. Remove the misfed paper without tearing it.

* If the paper does happen to tear, remove any loose scraps from inside the copier.

3. Close the right upper cover.

●

 Misfeed inside the right lower cover

If “PAPER MISFEED. OPEN RIGHT LOWER COVER.” and the misfeed location indica-
tor shown in the illustration appear on the touch panel, a misfeed has occurred inside the
right lower cover.
* If the copier is equipped with the optional Side Deck, first pull the Side Deck away from

the copier before you perform the following procedure.

1. Open the right lower cover.

2. Remove the misfed paper without tearing it.

* If the paper does happen to tear, remove any loose scraps from inside the copier.

3. Close the right lower cover.

10-6

Содержание DC 2062






































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды