manualshive.com logo in svg

Triumph Adler DC 2062, Инструкция по эксплуатации

Поделиться
Скачать
Triumph Adler DC 2062 Скачать руководство пользователя страница 55

Section 5  OTHER CONVENIENT FUNCTIONS

2A080030A

KM-6230 (KME)

/ 131

1. Set the transparencies in the stack bypass tray.

POINT OF INFORMATION
• Fan out the transparencies at least once before setting them.
• Up to 25 transparencies can be loaded into the stack bypass tray at one time.
• Make sure that paper of the same size as the transparencies is loaded in one of the drawers

or decks.

2. Set the originals.
3. Touch the “FUNCTION” key.

The function select screen will appear.

4. Touch the “TRANS + BACK” key. (If that key is not displayed, touch the “

▼

” key or the “

▲

”

key until it is displayed.)
The transparency backing mode set-up screen will appear.

5. Touch the “COPIED” key if you want to copy onto the backing sheet, and the “BLANK” key

if you do not want to copy onto the backing sheet.

5-17

E_Sec5_Kinou.PM6

10/16/00, 7:14

18

Содержание DC 2062






































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды