manualshive.com logo in svg

Triumph Adler DC 2062, Инструкция по эксплуатации

Поделиться
Скачать
Triumph Adler DC 2062 Скачать руководство пользователя страница 63

Section 5  OTHER CONVENIENT FUNCTIONS

2A080030A

KM-6230 (KME)

/ 131

• When you do not want to copy onto the cover sheet…

The first page of the originals is copied onto the front of the page that comes after the cover
sheet and the second page onto the back of that page. Copies are then made so that the
content can be read sequentially with the pages spread open.

1

 Right-side binding orientation

The order of copying will be performed so that the stacked and folded pages of the
finished copies will read from right to left.

2

 Left-side binding orientation

The order of copying will be performed so that the stacked and folded pages of the
finished copies will read from left to right.

1. Touch the “FUNCTION” key.

The function select screen will appear.

2. Touch the “STITCHING” key. (If that key is not displayed, touch the “

▼

” key or the “

▲

” key

until it is displayed.)
The binding mode set-up screen will appear.

3. Select the front cover copy mode that you want to use by touching either the “DUPLEX”,

“FRONT” or “BLANK” key.

4. Specify the type of the originals that are being used by touching either the “DUPLEX” or

“1-SIDED” key.

2

1

8

7

4

3

6

5

5-25

E_Sec5_Kinou.PM6

10/16/00, 7:14

26

Содержание DC 2062






































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды