Triton Zante, Инструкция по установке и эксплуатации

Страница: 22 / 29

Zanté electric shower
0
CLEANING THE SHOWERHEAD
Before cleaning, turn off the unit at the isolation
switch to avoid the shower being accidentally
switched on.
IT IS IMPORTANT TO KEEP THE SHOWERHEAD
CLEAN TO MAINTAIN THE PERFORMANCE
OF THE SHOWER. The hardness of the water
will determine the frequency of cleaning. For
example, if the shower is used every day in a
very hard water area, it may be necessary to
clean the showerhead on a weekly basis.
Sprayplate removal
There is no need to remove the showerhead
from the hose.
Using the removal tool supplied
(fig.)
,
locate the raised ’bosses’ into the recesses in the
sprayplate. Hold in firmly and twist anti-clockwise
(fig.)
. This movement may turn the cartridge
assembly as well until it reaches a ‘STOP’.
Hold the cartridge firmly and continue to twist
anti-clockwise. Having loosened the sprayplate, it
can be unscrewed and removed completely.
Clean the sprayplate with a suitable brush or
preferably leave it to soak overnight in a mild
proprietary descalent. Make sure all traces of
scale are removed and thoroughly rinse in clean
water afterwards.
Before replacing the sprayplate, switch the
power back on at the isolating switch and direct
the hose and showerhead to waste.
Turn the temperature control fully anti-clockwise.
Press the start/stop button.
This operation will flush out any loose scale
deposits in the unit and showerhead. Stop after
about thirty seconds.
Refit the sprayplate by screwing clockwise. Use
the tool to screw the sprayplate tight.
Sprayplate
key
Sprayplate
Fig.
Fig.
WARNING!
do Not use ‘powerful’ abrasive or
solvent cleaning fluids when cleaning
the shower as they may damage the
plastic fittings.