Triton Zante, Инструкция по установке и эксплуатации

Страница: 17 / 29

Zanté electric shower
performance throughout the year. Temperature
adjustment at this setting is via the temperature
control.
To adjust the shower temperature
The water temperature is altered by increasing
or decreasing the flow rate of the water through
the shower via the temperature control
(fig.) .
After obtaining your preferred shower
temperature, the position can be remembered
and left as the normal setting and should only
need to be altered to compensate for seasonal
changes in ambient water temperature.
Note: The preferred position on ‘ECONOMY’
will give a different temperature to the same
number position on ‘HIGH’.
To decrease the shower temperature
Turn the temperature control anti-clockwise;
this will increase the flow of water through the
shower and be indicated by the blue arrows.
To increase the shower temperature
Turn the temperature control clockwise; this will
decrease the flow of water through the shower
and be indicated by the red arrows.
Note: It is advisable to be certain that the
showering temperature is satisfactory by testing
with your hand before stepping under the
showerhead. There will always be a time delay
of ten to fifteen seconds between selecting a
flow rate and the water reaching the stable
temperature for that flow rate.
CAutIoN:
It is recommended that persons
who may have difficulty understanding or
operating the shower controls should not
be left unattended whilst showering. Special
consideration should be given to young
children and the less able bodied.
WARNING!
After any servicing of the mains water
supply, always make sure the unit is
started on Cold in order to purge any
air in the pipework.