background image

service policy

In the event of a complaint occurring, the 

following procedure should be followed:

1

 Telephone Customer Service on +44 (0) 24 

7637 2222

 

(+44 (0) 84 5762 6591 in Scotland 

and in Northern Ireland), having available the 

model number and power rating of the product, 

together with the date of purchase.

Triton Customer Service will be able to confirm 

whether the fault can be rectified by either the 

provision of a replacement part or a site visit from 

a qualified Triton service engineer.

3

 

If a service call is required the unit must be fully 

installed for the call to be booked and the date 

confirmed. In order to speed up your request, 

please have your postcode available when 

booking a service call.

4

 It is essential that you or an appointed 

representative (who must be a person of 18 years 

of age or more) is present during the service 

engineer's visit and receipt of purchase is shown.

5

 

A charge will be made in the event of an 

aborted service call by you but not by us, or 

where a call under the terms of guarantee has 

been booked and the failure is not product 

related (i.e. scaling and furring, incorrect water 

pressure, pressure relief device operation, 

electrical installation faults). 

6

 If the product is no longer covered by the 

guarantee, a charge will be made for the site visit 

and for any parts supplied.

7

 Service charges are based on the account being 

settled when work is complete, the engineer will 

then request payment for the invoice. If this is not 

made to the service engineer or settled within 

ten working days, an administration charge will 

be added.

Replacement parts policy

Availability:

 It is the policy of Triton to maintain 

availability of parts for the current range of 

products for supply after the guarantee has 

expired. Stocks of spare parts will be maintained 

for the duration of the product’s manufacture 

and for a period of five years thereafter.
In the event of a spare part not being available a 

substitute part will be supplied.

Payment: 

The following payment methods can be 

used to obtain spare parts:

1

 By post, pre-payment of pro forma invoice by 

cheque or money order.

2

 By telephone, quoting credit card (MasterCard 

or Visa) details.

3

 By website order, www.tritonshowers.co.uk

tRItoN stANdARd GuARANtee

Triton Plc guarantee this product against all 

mechanical and electrical defects arising from 

faulty workmanship or materials for a period of 

two years for domestic use only, from the date of 

purchase, provided that it has been installed by 

a competent person in full accordance with the 

fitting instructions.
Any part found to be defective during this 

guarantee period we undertake to repair or 

replace at our option without charge so long as 

it has been properly maintained and operated in 

accordance with the operating instructions, and 

has not been subject to misuse or damage.
This product must not be taken apart, modified 

or repaired except by a person authorised 

by Triton Plc. This guarantee applies only 

to products installed within the United 

Kingdom and does not apply to products used 

commercially. This guarantee does not affect 

your statutory rights.

What is not covered:

1

 

 Breakdown due to: 

a)

 use other than domestic 

use by you or your resident family;  

b)

 wilful act or neglect; 

c)

 any malfunction 

resulting from the incorrect use or quality of 

electricity, gas or water or incorrect setting of 

controls; 

d)

 faulty installation.

2

 

 Repair costs for damage caused by foreign 

objects or substances.

3

  Total loss of the product due to non-

availability of parts.

4

  Compensation for loss of use of the product or 

consequential loss of any kind.

5

 

 Call out charges where no fault has been 

found with the appliance.

6

 

 The cost of repair or replacement of pressure 

relief devices, showerheads, hoses, riser rails 

and/or wall brackets, isolating switches, electrical 

cable, fuses and/or circuit breakers or any other 

accessories installed at the same time.

7

 

 The cost of routine maintenance, adjustments, 

overhaul modifications or loss or damage arising 

therefrom, including the cost of repairing 

damage, breakdown, malfunction caused by 

corrosion, furring, pipe scaling, limescale, system 

debris or frost.

Triton Plc 

Triton Road 

Nuneaton 

Warwickshire  CV11 4NR

Customer service: 

%

 + (0)   

scottish and Northern Ireland 

Customer service: 

%

 

+ (0)   9

 trade Installer hotline: 

%

 + (0)   9 

Fax: + (0)   

www.tritonshowers.co.uk 

e mail: [email protected]

Содержание Zante






























Отзывы: