Thermostatic electric shower
8
Make sure the PRD outlet at the bottom of the
unit is not blocked
(fig.7)
.
When commissioning, the showerhead must be
removed from the flexible hose. Failure to follow
this procedure may cause the PRD to operate.
Make sure the shower is positioned over a bath
or shower tray because if the PRD operates, then
water will eject from the bottom of the unit.
Should this happen, turn off the electricity and
water supplies to the shower at the isolating
switch and stopvalve. Contact Customer Service
for advice on replacing the PRD.
Area to keep clear
Fig.8
Fig.9
Fig.7
WaRNING!
If using a silicon seal around the
backplate edge, make sure the pRD
exit behind the outlet pipe is kept
clear.
