Triton Shannon, Инструкция по установке и эксплуатации

Страница: 4 / 28

Shannon electric shower
Electrical
Nominal rating at 230V
8.5kW – (40A MCB rating)
Water
Inlet connection – 15 mm diameter.
Outlet connection – ½” BSP male thread.
Entry Points
Water – top, bottom, back, left or right.
Cable – top, bottom, back, left or right.
Materials
Backplate, cover, controls, showerhead – ABS.
Sprayplate – Acetal.
Elements – Minerally insulated corrosion resistant
metal sheathing.
Dimensions
Height – 300 mm
Width – 208 mm
Depth – 110 mm
Standards and Approvals
Splashproof rating IPX4.
Complies with the requirements of current British
and European safety standards for household
and similar electrical appliances.
Complies with requirements of the British
Electrotechnical Approvals Board (BEAB).
Meets with Compliance with European
Community Directives (CE).
rubber.
ADVICE tO uSERS
ADVICE TO USERS
I-001-A
IMPORTANT: When first installed the unit
will be empty. It is essential the unit should
contain water before the elements are
switched on. It is vital that the
commissioning procedure is followed.
Failure to carry out this operation will result
in damage to the unit and will invalidate the
guarantee.
J-002-A
The following points will help you understand
how the shower operates:
a.
b.
c.
If ever the water becomes too hot and you
cannot obtain cooler water, first check that
the sprayplate in the showerhead has not
become blocked.
DO NOT place items such as soap or shampoo
bottles on top of the unit. Liquid could seep
through the joint between the cover and
backplate, and possibly damage the sealing
rubber.
The electric heating elements operate at a
constant rate at your chosen power setting. It
is the rate of the water passing through the
heater unit which determines the shower
temperature at any given setting. (The slower
the flow the hotter the water becomes, and
the faster the flow the cooler the water).
During winter, mains water supply will be
cooler than in summer. Therefore, the
temperature of the shower will vary between
seasons on any one setting of the temperature
control.At different times of the year you may
have to adjust the position of the temperature
control to maintain your desired temperature
setting.
The stabiliser valve minimises variations in
shower temperature during mains water
pressure changes. If changes in shower
temperature are experienced during normal
use, it will most likely be caused by the water
pressure falling near to or below the
minimum level. The drop in pressure may be
due to water being drawn off at other points
in the house whilst the shower is in use. If
pressure drops appreciably below the
minimum, the heating elements will
automatically cut out.
Y-003-A
Replacement parts can be ordered from Customer
Service. See
‘spare parts’ for details and part numbers.
INtRODuCtION
INTRODUCTION
C-008-A
This book contains all the necessary fitting and
operating instructions for your Triton electric
shower. Please read them carefully.
The shower installation must be carried out by a
suitably qualified person and in the sequence of
this instruction book.
Care taken during the installation will provide a
long, trouble-free life from your shower.
SPECIFICAtIONS
SPECIFICATIONS