Triton Shannon, Инструкция по установке и эксплуатации

Страница: 18 / 28

Shannon electric shower
OPERAtING FuNCtIONS
OPERATING FUNCTIONS
Power on indicator
(fig.)
When the electricity supply to the shower is
switched on at the isolating switch, the ‘POWER’
indicator will light.
Low water pressure cut-out
If the water pressure falls below the minimum
required for correct operation of the shower,
power will be switched off to the heating
elements preventing any maintained
temperature rises (water will continue to flow).
Power will automatically be restored when
adequate water pressure returns.
overheat cut-out
During normal operation if an overheat
temperature is sensed, power to the elements
will be reduced. Water will continue to flow.
When the temperature has cooled sufficiently,
power to the elements will be automatically
restored to the previous setting at the time of
interruption.
Safety cut-out
the unit is fitted with a thermal cut-out safety
device. In the event of abnormal operation
which could cause unsafe temperatures within
the unit, the device will disconnect the heating
elements. It will require a visit from a qualified
engineer to determine the nature of the fault
and replace the safety device, once the unit has
been repaired.
t00327
Power on
indicator
Fig.
W-007-A
WARNING!
DO NOT use abrasive or aggressive
cleaning products when cleaning the
shower as they may damage the unit.