Triton NOVA Thermostatic Series, Инструкция по установке и эксплуатации

Страница: 17 / 28

17
Electric shower
Clip the neon with the brown wires into the low
pressure neon holder
(fig.18) .
Clip the neon with the grey/yellow wires into the
start/stop neon holder
(fig.19) .
Carefully guide the cover onto the backplate
making sure the wires are not trapped.
NOTE: DO NOT remove the cable tie in this unit.
Guide the cover into position so that the knob
spindles locate correctly - minor adjustment may
be necessary to align the knobs and spindles.
While applying slight pressure to the front cover,
secure in place using the three retaining screws.
Fit the riser rail and rit - see kit instructions.
Clip neon into
the holder
Clip neon into
the holder
Fig.18
8
Continued
SECTION SECTION
WARNING
COVER RETAINING SCREWS
ONLY the SUPPLIED SCREWS should be
used. The use of non supplied screws WILL
invalidate product specifications & warranty.
Clip neon into
the holder
Clip neon into
the holder
Fig.19
IMPORTANT
PLEASE ENSURE COVER SCREWS PROVIDED
ARE FULLY TIGHTENED DOWN TO PREVENT
WATER ENTERING THE SHOWER UNIT.