Triton NOVA Thermostatic Series, Инструкция по установке и эксплуатации

Страница: 20 / 28

20
Electric shower
Temperature Adjustment - Economy
and High settings only
The water temperature is altered by increasing or
decreasing the flow rate of the water through the
shower via the temperature control
(fig.22).
After obtaining your showering temperature,
the knob can be left in the same position, the
temperature control will only require adjusting
if you wish to alter the desired showering
temperature.
NOTE: The preferred knob position on
ECONOMY will give a different temperature to
the same position on HIGH.
To decrease the shower temperature turn
the temperature control anti-clockwise - this
will increase the flow of water through the
shower and make the water
colder .
To increase the shower temperature turn
the temperature control clockwise , this will
decrease the flow of water through the shower
and make the water
hotter .
NOTE: It is advisable that the showering
temperature is satisfactory by testing
with your hand before stepping under the
shower head. There will always be a time
delay of a few seconds between selecting a
flow rate and the water reaching the stable
temperature for that flow rate.
OPERATING FUNCTIONS
Power on indicator
(fig.23)
When the electricity supply to the shower is
switched on at the isolating switch, the neon in
the START/STOP button will illuminate.
TP – Temperature Protection
During normal operation if the temperature
exceeds the showering safety limit the power
to the elements will be removed completely,
although water will continue to flow. When the
temperature has cooled sufficiently, power to the
elements will be automatically restored to the
settings at the time of interruption.
Abnormal Safety cut-out
The unit is fitted with a non-resettable thermal
cut-out safety device. In the event of abnormal
Low pressure Low pressure
indicator indicator
Fig.23
Power on indicator Power on indicator