Triton Blue V700S-E, Руководство пользователя

Страница: 14 / 24

-
１３
- XM095 V1.2 NR
• Set the DMX-value of channel 3 to the desired starting address. If you want to set the starting address to 57, set
channel 1 to "7", channel 2 to "7" and channel 3 to "57". If you want to set the starting address to 420,set channel 1
to "7", channel 2 to "8" and channel 3 to "164" (256+164=420).
• Wait for approx. 20 seconds and the unit will carry out a reset. After that, the new starting address is set.
No DMX Status
With this function, when the drive is not DMX signal, it runs automatism, close, hold and music, the default is hold.
Pan Reverse
With this function you can reverse the Pan-movement.
Tilt Reverse
With this function you can reverse the Tilt-movement.
Fine resolution
With this function, you can fine resolution switch of pan movement or tilt movement.
Pan Degree
With this function, you can select pan degree for 630 or 540.
Dimmer speed
With this function, you can select dimmer speed for slow or quick.
Feedback
With this function, you can feedback switch of pan movement or tilt movement.
Movement Speed
With this function, you can select scan mode from 1 to 4.
Mic Sensitivity
With this function, the default is 70%, you can select the desired microphone sensitivity from 0 % to 99 %.
Service setting
Service Password
With this function, you can set the service password.
Fan Voltage
With this function, you can select fan voltage for high or low, the default is low
Attention: The model is not recommended when ambient temperature is higher than 15 Celsius degree.
Gobo speed
With this function, you can select GOBO speed for c quick or slow , the default is slow.
Fans Control
With this function, you can set the speed of the running fans. The selections have Auto
、
high and low.
Display settings
Shut off time
With this function you can shut off the LCD display after 2 to 59 minutes. Turn the encoder in order to select the
desired shut off time.
Temperature C/F
With this function, Display the temperature for Celsius or Fahrenheit.
Initial effect
With this function, Display initial effect position.