-
１０
- XM095 V1.2 NR
Reset Default
ON/OFF
Restore factory set.
Re
se
t F
un
ct
io
n
Reset All
Reset Pan&Tilt
Reset Colors
Reset Gobos
Reset Shutter
Reset Others
Reset all motors
Reset Pan/Tilt
Reset color wheel
Reset gobos
Reset shutter and/or dimmer
Reset other motors
Test Channel
PAN ……
Test function
Manual Control
PAN
:
PAN =XXX
:
Fine adjustment of the lamp
Ef
fe
ct
A
dj
us
t
Calibrate Values
--Password--
Color wheel
:
Password=XXX
Color wheel=XXX
:
Calbrate and adjust the
effects to standard/right
position Password “050”
User Mode
XXXXXX(Band)
User Mode A
User Mode B
User Mode C
User’s mode to change
channel numbers
Us
er
s
M
od
e
S
et
Edit User Mode
PAN
:
PAN = CH01
:
Preset User modes
Select Programs
Auto Pro Part 1
Auto Pro Part 2
Auto Pro Part 3
Program 1 ~ 10 Program 1
Program 1 ~ 10 Program 2
Program 1 ~ 10 Program 3
Select programs to be run
Edit Program
Program 1
:
Program 10
Program Test
Step 01=SCxxx
Step 64=SCxxx
(“STEP XX”)
Testing program
Program in loop
Save and exit
Edit Scenes
Edit Scene 001
~ Edit Scene 250
Pan,Tilt,……
--Secne Time--
Input By Outside
Pan=xxx……
TIME=xx.xs
Save and automatically
return
manual scenes edit
Ed
it
P
ro
gr
am
Rec. Controller
XX~XX
Automat. scenes rec
Function Mode
DMX address setting
With this function, you can adjust the desired DMX-address via the Control Board.
• Select
“Set DMX address”
via the encoder.
• Press the encoder, adjust the DMX address by turning the encoder.
• Press the encoder to confirm.
• Press the Mode/Esc-button in order return to the main menu.
Display the DMX 512 value of each channel
With this function you can display the DMX 512 value of each channel. The display automatically shows the channel
with a value changing.
Slave setting
With this function, you can define the device as slave.
Auto Program
With this function, you can run the internal program. You can select the desired program under
“Select program”
.
You can set the number of steps under
“Edit program”
. You can edit the individual scenes under
“Edit scenes”
.
With this function, you can run the individual scenes either automatically, i.e. with the adjusted Step-Time.
