WIT042 V1.1-01NR
9
installation via the Clamp
Screw one clamp each via a M10 screw and nut directly into the bracket of the unit. Pull the
safety-chain through the eyelet on the rear of the unit and over the trussing system or a safe
fixation spot.
Master/Slave-operation
The master/slave-operation enables that several devices can be synchronized and
controlled by one master-device. On the rear panel of the LIGNTING EFFECT you can find
an XLR-jack (DMX Out) and an XLR-plug (DMX In), which can be used for connecting
several devices.
Choose the device which is to control the effects. This device then works as master-device
and controls all other slave-devices, which are to be connected to the master-device via a
balanced microphone lead. Connect the DMX OUT-jack with the DMX IN-plug of the next
device.
Set DIP-switch No. 11 to On for the master-device. Set DIP-switch No. 1 to On for all
slave-devices.
