WIT042 V1.1-01NR
14
Channel 3 - Shutter, strobe
0-3
Shutter closed
4-7
Shutter closed & Motor Reset
8-31
Shutter closed
32-63
Dimmer (close to open)
64-95
Strobe effect slow to fast
96-127
No function (shutter open)
128-159
Pulse-effect in sequences
160-191
No function (shutter open)
192-223
Random strobe effect slow to fast
224-255
No function (shutter open)
Channel 4 - Auto Program:
0-23
Nomal
24-47
Auto Program 1
48-71
Auto Program 2
72-95
Auto Program 3
96-119
Auto Program 4
120-143
Auto Program 5
144-167
Auto Program 6
168-191
Auto Program 7
192-215
Auto Program 8
216-239
Auto Program 9
240-255
Auto Program 10
CLEANING AND MAINTENANCE
The operator has to make sure that safety-relating and machine-technical installations are
inspected by an expert after every four years in the course of an acceptance test. The
operator has to make sure that safety-relating and machine-technical installations are
inspected by a skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tightly
connected and must not be corroded.
2) There must not be any deformations on housings, fixations and installation spots
(ceiling, suspension, trussing).
3) Mechanically moved parts like axles, eyes and others must not show any traces of
wearing (e.g. material abrading or damages) and must not rotate with unbalances.
4) The electric power supply cables must not show any damages, material fatigue (e.g.
porous cables) or sediments. Further instructions depending on the installation spot and
usage have to be adhered by a skilled installer and any safety problems have to be
removed.
