WIT042 V1.1-01NR
13
Stand Alone operation
In the Stand Alone mode, the LIGHTING EFFECT can be used without controller. You can
do without a controller as the LIGHTING EFFECT features a built-in microphone, which
provides automatic sound control. Disconnect the LIGHTING EFFECT from the controller
and set the DIP-switch 10 to On.
The lamp is automatically ignited as soon as the condenser microphone receives music
signals.
Call up the Auto program
In order to call up the Auto program, set all DIP-switches to Off.
Master/Slave-operation
Connect the master and slave-devices as desired above and set the DIP-switches
accordingly.
Please note:
If you wish to change from one operating mode into another, you either have
to switch off the lamp/activate Blackout-mode or unplug the projector from the mains and
plug it again.
Auto Program MIC SENSITIVITY-button
1. Put the Dip-switch in the sound mode and adjust the sensitivity of the activated sound
by turning the MIC SENSITIVITY-button.
2. In the Auto Program mode (all Dip-switches to OFF) you can select different internal
programs with this button.
DMX-controlled operation
You can control the projectors individually via your DMX-controller. Every DMX-channel
has a different occupation with different features.
DMX channel´s functions and their values (4 DMX channels):
Channel 1 - Color Wheel 1:
0-127
Gobo indexing
128-187
Forwards rainbow effect from fast to slow
188-193
No rotation
194-255
Backwards rainbow effect from slow to fast
Channel 2 - Prism rotation :
0-7
No rotation
8-127
forwards gobo rotation from fast to slow
128-135
No rotation
136-255
Backwards gobo rotation from slow to fast
