Important Safety Instructions
Connection and Start-Up
Plug your UPS’s line cord into an
electrical outlet.
Your UPS must be connected to a dedicated circuit of
sufficient amperage. Note, however, that the select models
may be fitted with different plug types. Refer to the “OP
Rating/ Plug Rating” chart printed on the top of your
UPS.
Once your UPS is plugged in, the fan and all Indicator
Lights will turn ON. The “LINE” and “LOAD ACTIVE
METER” LEDs will illuminate and the UPS will emit a beep
to indicate normal operation. However, power is not supplied
to your UPS’s AC outlets until the UPS is turned on.
Plug your equipment into your UPS.
Your UPS is designed to support audio/video systems and
their associated servers, Media Center PCs, and a Tripp Lite
HT3100PC or HT7300PC Power Conditioning Center only.
The total number of components connected should not
exceed UPS capacity. This will overload your UPS system.
You will also overload your UPS if you connect household
appliances to the UPS's outlets.
Turn your UPS ON:
• Press the “ON/TEST” Button
• Hold it for several seconds until you hear a beep
• Release it
Your UPS will begin providing AC power to its outlets. The “ON LINE” LED
will illuminate.
Note: The UPS system will function properly upon initial startup, however,
maximum runtime for the unit’s battery will only be accessible after it has
been charged for 24 hours.
Your UPS will function properly without these
connections.
Phone/Network Line Surge
Suppression (Select Models)
These RJ-45 jacks protect connected equipment from
surges
on a phone or network line.* Using appropriate network
cords, connect your wall jack to the UPS jack marked IN
and your equipment to the UPS jack marked OUT. Make
sure that the equipment you connect to the RJ-45 jacks is
also protected on the AC power line.
* Not compatible with PoE (Power Over Ethernet) applications.
CAUTION
Risk of electric shock
See top of unit for cautionary markings
WARNING
CONNECT 48 VDC
BATTERY SYSTEMS ONLY
CONNECTING OTHER
SYSTEMS WILL VOID
WARRANTY
30A
Your model may differ.
1
1
2
3
2
3
Your model may differ.
Installation
(continued)
4
Optional Connections
1
CAUTION
Risk of electric shock
See top of unit for cautionary markings
WARNING
CONNECT 48 VDC
BATTERY SYSTEMS ONLY
CONNECTING OTHER
SYSTEMS WILL VOID
WARRANTY
30A
1
200907169 93-2615.indd 4
8/11/2009 10:14:59 AM
