Tripp Lite NGI-M08C4-L2, Руководство пользователя

Страница: 269 / 313

269
Parameter Description
Traffic Monitor Settings
State Globally enables / disables the traffic monitor function.
Port The port range which you want to configure.
State Enables / disables the traffic monitor function on these ports.
Packet Type Specify the packet type which you want to monitor.
Packet Rate Specify the packet rate which you want to monitor.
Recover State
Enables / disables the recovery function for the traffic monitor
function on these ports.
Recovery Time
Configures the recovery time for the traffic monitor function on
these ports.(Range: 1 – 60 minutes)
Quarantine Times
Configures the quarantine times for the traffic monitor on these
ports. (Range: 1 – 20 times)
Apply
Click Apply to take effect the settings.
Refresh
Click Refresh to begin configuring this screen afresh.
Manual Recovery
Select
Unblock
to enable these ports blocked by traffic monitor.
Apply
Click Apply to take effect the settings.
9. Management
9.1 SNMP
Simple Network Management Protocol (SNMP) is used in network management systems to
monitor network-attached devices for conditions that warrant administrative attention. SNMP is
a component of the Internet Protocol Suite as defined by the Internet Engineering Task Force
(IETF). It consists of a set of standards for network management, including an application layer
protocol, a database schema, and a set of data objects.
SNMP exposes management data in the form of variables on the managed systems, which
describe the system configuration. These variables can then be queried (and sometimes set) by
managing applications.
Support Below MIBs:

RFC 1157 A Simple Network Management Protocol

RFC 1213 MIB-II

RFC 1493 Bridge MIB

RFC 1643 Ethernet Interface MIB

RFC 1757 RMON Group 1,2,3,9