Tripp Lite NGI-M08C4-L2, Руководство пользователя

Страница: 168 / 313

168
configure ptp enable This command enables PTP.
configure no ptp enable This command disables PTP.
configure ptp primary-domain <0-127> This command configures a specified Domain
ID as the PTP’s primary domain.
configure no ptp primary-domain This command resets the primary domain ID
default domain ID (0).
Example:

Enabling PTP: This command is used to enable PTP; by default PTP is disabled
L2SWITCH(config)#ptp enable

Disabling PTP: This command is used to disable PTP
L2SWITCH(config)#no ptp enable

Adding Primary Domain: This command is used to add specified domain ID as primary
domain in PTP; By default primary domain ID is 0.
L2SWITCH(config)#ptp primary-domain 1

Deleting Primary Domain: This command is used to delete existing primary domain ID from
PTP and adds default domain ID (0) as primary domain ID.
L2SWITCH(config)#no ptp primary-domain