Tripp Lite NGI-M08C4-L2, Руководство пользователя

Страница: 130 / 313

130
Apply Click
Apply
to take effect the settings.
Refresh Click Refresh to begin configuring this screen afresh.
Action Click Delete to delete the MAC VLAN profile.
6.3.7.2 Port-Based Q-in-Q
6.3.7.2.1 CLI Configuration
Node Command Description
enable show vlan-stacking
portbased-qinq
This command displays the port-based q-in-Q
configurations.
enable configure terminal This command changes the node to configure
node.
configure interface IFNAME This command enters the interface configure
node.
interface vlan-stacking port-based
priority <0~7>
This command sets the priority in port based Q-
in-Q.
interface vlan-stacking port-based role
(tunnel|access|normal)
This command sets VLAN stacking port role.
interface vlan-stacking port-based
spvid <1~4096>
This command sets the service provider’s VID of
the specified port.
interface vlan-stacking tunnel-tpid
index <1-6>
This command sets TPID for a Q-in-Q tunnel
port.
configure interface range
gigabitethernet1/0/PORTLIS
TS
This command enters the if-range configure
node.
if-range vlan-stacking port-based
priority <0~7>
This command sets the priority in port based Q-
in-Q.
if-range vlan-stacking port-based role
(tunnel|access|normal)
This command sets VLAN stacking port role.
if-range vlan-stacking port-based
spvid <1~4096>
This command sets the service provider’s VID of
the specified port.
if-range vlan-stacking tunnel-tpid
index <1-6>
This command sets TPID for a Q-in-Q tunnel
port.