Tripp Lite NGI-M08C4-L2, Руководство пользователя

Страница: 239 / 313

239
acl ethertype STRING This command configures the ether type for
the profile. Where the STRING is a hex-
decimal value. e.g.: 08AA.
acl no ethertype This command removes the limitation of the
ether type from the profile.
acl source mac host MACADDR This command configures the source MAC
and mask for the profile.
acl source mac MACADDR
MACADDR
This command configures the source AMC
and mask for the profile.
acl no source mac This command removes the source MAC and
mask from the profile.
acl source ip host IPADDR This command configures the source IP
address for the profile.
acl source ip IPADDR IPMASK This command configures the source IP
address and mask for the profile.
acl no source ip This command removes the source IP address
from the profile.
acl destination ip host IPADDR This command configures a specific
destination IP address for the profile.
acl destination ip IPADDR IPMASK This command configures the destination IP
address and mask for the profile.
acl no destination ip This command removes the destination IP
address from the profile.
acl l4-source-port IPADDR This command configures UDP/TCP source
port for the profile.
acl no l4-source-port IPADDR This command removes the UDP/TCP source
port from the profile.
acl L4-destination-port PORT This command configures the UDP/TCP
destination port for the profile.
acl no l4-destination-port This command removes the UDP/TCP
destination port from the profile.
acl vlan <1-4094> This command configures the VLAN for the
profile.
acl no vlan This command removes the limitation of the
VLAN from the profile.
acl source interface PORT_ID This command configures the source
interface for the profile.
acl no source interface PORT_ID This command removes the source interface
from the profile.
Where the MAC mask allows users to filter a range of MAC in the packets’ source MAC or
destination MAC.
Example:
source mac 00:01:02:03:04:05 ff:ff:ff:ff:00