7
5.5 Components
Front View
B024-H4U08
B024-H4U16
No. Component
Description
1
Port Selection
Pushbuttons
For manual port selection:
• Press a port selection pushbutton for less than two seconds to bring the KVM, USB hub
and audio focus to the computer attached to its corresponding port.
• Press a pushbutton for longer than two seconds to bring the KVM and audio focus to the
computer attached to its corresponding port.
• Press pushbuttons 1 and 2 simultaneously for 2 seconds to perform a keyboard and
mouse reset. See section
10.6 Keyboard / Mouse Reset
for details.
• Press pushbuttons 7 and 8 simultaneously for 2 seconds to start Auto Scan Mode.
2
Port LEDs
The Port LEDs are built into the Port Selection Switches. The left ones are the KVM Port
LEDs; the right ones are the USB LEDs:
KVM
• Lights DIM ORANGE to indicate the computer attached to the corresponding port is up
and running (on line).
• Flashes to indicate that Firmware Upgrade mode is in effect.
• Changes to BRIGHT ORANGE to indicate that the computer attached to its corresponding
port is the one that has the KVM focus (selected).
• Flashes to indicate that the computer attached to its corresponding port is being accessed
under Auto Scan mode.
USB
• Lights GREEN to indicate that the computer attached to its corresponding port is the one
that has access to the USB peripherals.
5. System Requirements
1
1
2
2
3
3
5
5
7
7
4
4
6
6
8
8
