59
13. Firmware Management Utility
13.7 OSD Configuration Backup/Restore
The Firmware Management Utility lets you back up the current OSD configuration of the KVM and restore it when necessary.
Storing the OSD configuration settings is useful when deploying more than one installation that uses the same settings.
13.7.1 Backup
To store a backup file to a local computer:
1
Make sure your computer is connected to the KVM (see
13.2 Preparation
and follow steps 1–3).
2
When you have selected the F4 Admin function, scroll down to OSD Config Backup / Restore. Press [Enter],
then select
Enable
to invoke OSD Config Backup / Restore mode.
3
Run the Firmware Management Utility. In the dialog box, choose “OSD Configuration Backup/Restore,”
then click
Next
.
4
In the window that appears, click
Connect Device
.
5
In the Password field, key in a password for the file.
Note:
Setting a password is optional. If you do not set one, the file can be restored without specifying a password.
6
Click
Backup
.
7
When the browser asks what you want to do with the file, select “Save to disk,” then save it in a convenient location.
