48
Upload a Floppy Image
Two simple steps enable the user to work on the basis of a certain (floppy) image.
• First the path of the image has to be specified. You can do that either by hand or by using the file
selection dialog of your web browser. To open the file selection dialog click on the button “Browse”
and
select the desired image file.
Figure 6-5. Select Image File
The maximum image size is limited to 1.44MB. To use a larger image, mount this image via Windows Share (or SAMBA)
(see the Section called Use Image on Windows Share (SAMBA) for details).
• Then click on the button “Upload” to initiate the transfer of the chosen image file into the B050-000's
on-board memory. This image file is kept in the on-board memory of the B050-000 until the end of the
current session, until you log out or initiate a reboot of the B050-000.
Download a Floppy Image
A floppy image kept in the B050-000's memory can be both read and written to. To retrieve the changed image contents
after writing to it, click the “Download” button and select a folder to store the file in.
Figure 6-6. Active Image File
6. Menu Options
