•
In AC voltage test mode, Press
PEAK/INRUSH
Button the Peak maximum
and Peak minimum values are measured.
•
In current test mode, Press
PEAK/INRUSH
Button the Inrush current values
are measured.
Relative/Backlight Button
The relative measurement feature allows you to make measurements relative
to a stored reference value, A reference voltage, current, Capacitance etc. can
be stored and measurements made in comparison to that value, The displayed
value is the difference between the reference value and the measured value.
•
Press the
“REL/Backlight
” Button to zero the display “ ” will appear in the
display.
•
To exit this mode, press the
“REL/Backlight”
Button again, and “ ” will
disappear in the display.
•
DC voltage measurement mode, Press the “
REL/Backlight”
Button to
“zero”
the display.
•
Press and hold the the “
REL/Backlight
” Button to turn the Backlight on, Press
and hold again to turn the Backlight off.
Relative/Backlight Button
•
In order to conserve battery life, the meter will automatically turn off after
approximately 15minutes.
•
To turn the meter on again, turn the function switch to the
OFF
position and
then to the desired function position.
•
To press and hold the
MODE/VFD
Button to turn the system on, the auto
power off function will be cancelled.
